Application
| Special feature | Background suppression |
Electrical data
| Operating voltage[V] | 10…30 DC; („supply class 2” to cULus) |
| Current consumption[mA] | 75; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Type of light | red light |
| Wave length[nm] | 650 |
| Typ. lifetime[h] | 50000 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (complementary) |
| Max. current load per output[mA] | 100 |
| Switching frequency DC[Hz] | 11 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Detection zone
| Max. light spot diameter[mm] | 5 | |
| Light spot dimensions refer to | 2 m | |
| Detection range hysteresis[%] | < 2.5 | |
| Note on monitoring range hysteresis |
|
|
| Background suppression available | yes | |
| Background suppression[m] | < 20 |
Measuring/setting range
| Measuring range[m] | 0.03…2 |
| Sampling rate[Hz] | 33 |
Interfaces
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis | ||||
| SIO mode | yes | ||||
| Process data analogue | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time[ms] | 6.6 | ||||
| Supported DeviceIDs |
|
Fii primul care scrii o recenzie pentru „O5D100 IFM SENZOR”
Produse similare
Senzori
400,00 lei
Senzori
300,00 lei
Senzori
500,00 lei
300,00 lei
Senzori
300,00 lei
Senzori
200,00 lei
Senzori
300,00 lei
Senzori
100,00 lei
Recenzii
Nu există recenzii până acum.